Ricoh Aficio BP20N User Manual Download

Page: 100 / 249

RINTING

ASKS

4.23

Editing a Watermark

To change the print settings from your software application,
access printer properties. See page 4.2.

Click the

Extras

tab and click

Edit

in the

Watermark

section. The Edit Watermark window appears.

Select the watermark you want to edit on the

Current

Watermarks

list. You can change the watermark message

and the options. Refer to page 4.22.

Click

Update

to save the changes.

Click

Deleting a Watermark

To change the print settings from your software application,
access printer properties. See page 4.2.

From the

Extras

tab, click

Edit

in the

Watermark

section.

The Edit Watermark window appears.

Select the watermark you want to delete on the

Current

Watermarks

list and click

Delete

Click

Summary of Contents for Aficio BP20N


























































































































































































































































Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands

Ricoh Aficio BP20N, User Manual

Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands