Ricoh Aficio BP20N User Manual Download

Page: 137 / 249

OLVING

PROBLEMS

Background

scatter

Background scatter results from bits of toner distributed on the

printed page.
• The paper may be too damp. Try printing with a different

batch of paper. Do not open packages of paper until

necessary so that the paper does not absorb too much

moisture.

• If background scatter occurs on an envelope, change the

printing layout to avoid printing over areas that have

overlapping seams on the reverse side. Printing on seams

can cause problems.

• If background scatter covers the entire surface area of a

printed page, adjust the print resolution through your

software application or the printer properties.

Misformed

characters

• If characters are improperly formed and producing hollow

images, the paper stock may be too slick. Try a different

paper. See “Paper Specifications” on page C.3.

• If characters are improperly formed and producing a wavy

effect, the scanner unit may need service. Verify that it also

occurs on a demo page (see page 2.15). For service, contact

a service representative.

Page skew

• Check the paper type and quality. See “Paper Specifications”

on page C.3.

• Ensure that the paper or other material is loaded correctly

and the guides are not too tight or too loose against the

paper stack.

Curl or wave

• Check the paper type and quality. Both high temperature and

humidity can cause paper curl. See “Paper Specifications” on

page C.3.

• Turn over the stack of paper in the tray. Also try rotating the

paper 180° in the tray.

• Try printing to the face up output slot.

Problem

Solution

AaBbCc

AaBbC

AaBbCc

Summary of Contents for Aficio BP20N


























































































































































































































































Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands

Ricoh Aficio BP20N, User Manual

Search results

Summary of Contents for Aficio BP20N

Reviews:

Related manuals for Aficio BP20N

Brands by name

Popular brands