Ricoh Aficio CL3000 Maintenance Manual Download

Page: 98 / 691

Mac OS

AAAA

From an application, select the menu command to print.

The print dialog box appears.

BBBB

Click to select

[

Job Log

]

from the pop up menu.

CCCC

Select

[

Sample Print

]

[

Job Type

]

, and then select the appropriate setting.

DDDD

Enter the “User ID” in

[

User ID

]

. This can consist of up to eight alphanumeric (a-z, A-Z, 0-9)

characters.

Note

❒

This is used to identify the user associated with a job.

❒

The "User ID" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) characters.

EEEE

After making all of the settings you want, click

[

Print

]

The Sample Print job is sent to the machine and one set is printed.

FFFF

Check the sample print to confirm that the settings are correct.

If the settings are correct, see "Printing the Remaining Sets" in the Client Reference.

If not, you can delete the saved job. See "Deleting a Sample Print File" in the Client Reference.

Summary of Contents for Aficio CL3000

















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio CL3000

Reviews:

Related manuals for Aficio CL3000

Brands by name

Popular brands

Ricoh Aficio CL3000, Maintenance Manual

Search results

Summary of Contents for Aficio CL3000

Reviews:

Related manuals for Aficio CL3000

Brands by name

Popular brands