Ricoh Aficio MP 1600 Facsimile Reference Manual Download | Manualshive

Page: 11 / 204

background image

1

NOTICE

❖

USA

❖

FCC Requirements

A

This equipment complies with Part 68 of the FCC rules and require-
ments adopted by the ACTA. On the cover of this equipment is a label
that contains, among other information, a product identifier in the for-
mat US:AAAEQ##TXXXXX. If requested, this number must be provid-
ed to the telephone company.

B

This equipment uses the RJ11C USOC jack.

C

A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. See in-
stallation instructions for detail.

D

The REN is used to determine the number of devices that may be con-
nected to a telephone line. Excessive RENs on a telephone line may re-
sult in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed five (5.0). To be cer-
tain of the number of devices that may be connected to a line, as deter-
mined by the total RENs, contact the local telephone company. The REN
for this product is part of the product identifier that has the format
US:AAAEQ##TXXXXX. The digits represented by ## are the REN with-
out a decimal point (e.g., 03 is a REN of 0.3).

E

If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice is not practical, the tele-
phone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you be-
lieve it is necessary.

F

The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equip-
ment. If this happens the telephone company will provide advance no-
tice in order for you to make necessary modifications to maintain
uninterrupted service.

G

If trouble is experienced with this equipment, for repair or warranty in-
formation, please contact RICOH CORP. CUSTOMER SUPPORT DEPT.
at 1-800-FASTFIX. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the
equipment until the problem is resolved.

H

In the event of operation problems (document jam, copy jam, commu-
nication error indication), refer to the solving problems section in this
manual.

«
...
9
10
11
12
13
...
»

Summary of Contents for Aficio MP 1600













































































































































































































Reviews:

No comments

Related manuals for Aficio MP 1600

Brand: IBM Pages: 112

Brand: Tally Pages: 202

Brand: UltraTape Pages: 52

Brand: Datamax Pages: 95

Mark II E-4205e

Brand: Datamax Pages: 72

Brand: IDStation Pages: 18

PAPERANG MonoSnap Lite

Brand: Xiamen Pages: 7

Brand: Xerox Pages: 14

Brand: Oki Pages: 156

Brand: ABLE Pages: 42

bizhub C452 Series

Brand: Konica Minolta Pages: 17

Brand: Agilent Technologies Pages: 2

Brand: DPM Pages: 2

Brand: QMS Pages: 188

Brand: Sinfonia Technology Pages: 41

TM-T88VI-iHub 751F1

Brand: Seiko Epson Pages: 8

Brand: Seiko Pages: 49

Brand: CIM Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands