No.
Definition
Symptom
Possible Cause
762
B
ADF gate abnormal 3
The FGATE signal is not terminated
by the ADF within 60 seconds after
the ADF starts feeding.
• ADF connector defective
• SBU board defective
800
B
Startup without video output end error
Video transfer to the engine is
started, but the engine did not issue
a video transmission end command
within the specified time.
• Controller board defective
804
B
Startup without video input end
A video transmission was
requested from the scanner, but the
scanner did not issue a video
transmission end command within
the specified time.
• Controller board defective
818
B
Watchdog error
The CPU does not access the
watchdog register within a certain
time.
• Controller board defective
• Software malfunction – download
controller firmware again
819
B
Kernel mismatch error
Software bug
• Download controller firmware again
820
B
Self-Diagnostic Error: CPU
The central processing unit
returned an error during the self-
diagnostic test.
• Controller board defective
• Download controller firmware again
821
B
Self-Diagnostic Error: ASIC
The ASIC returned an error during
the self-diagnostic test because the
ASIC and CPU timer interrupts
were compared and determined to
be out of range.
• Controller board defective
Service Call Conditions
187
6
Summary of Contents for Aficio MP 1600L2
