Ricoh Aficio MP 4000 Service Manual Download

Page: 617 / 1209

System SP Table-8

SM Appendix

4-185

D009/D011/D012/D013/D091/D092

Appe

ndix:

Service

Progra

Mode T

ables

Prefixes

What It Means

T: Total:

(Grand

Total).

Grand total of the items counted for all applications

(C, F, P, etc.).

C: Copy

application.

Totals (pages, jobs, etc.) executed for each

application when the job was not stored on the

document server.

F: Fax

application.

P: Print

application.

S: Scan

application.

Local storage

(document server)

Totals (jobs, pages, etc.) for the document server.

The L: counters work differently case by case.

Sometimes, they count jobs/pages stored on the

document server; this can be in document server

mode (from the document server window), or from

another mode, such as from a printer driver or by

pressing the Store File button in the Copy mode

window. Sometimes, they include occasions when

the user uses a file that is already on the document

server. Each counter will be discussed case by case.

Other applications

(external network

applications, for

example)

Refers to network applications such as Web Image

Monitor. Utilities developed with the SDK (Software

Development Kit) will also be counted with this

group in the future.

The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying

them on the small LCDs of printers and faxes that also use these SPs. Read over the list of

abbreviations below and refer to it again if you see the name of an SP that you do not

understand.

Key for Abbreviations

Summary of Contents for Aficio MP 4000


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 4000

Reviews:

Related manuals for Aficio MP 4000

Brands by name

Popular brands

Ricoh Aficio MP 4000, Service Manual

Search results

Summary of Contents for Aficio MP 4000

Reviews:

Related manuals for Aficio MP 4000

Brands by name

Popular brands