Scanner Features
198
6
❖
Wait Time for Next Original(s): SADF
When dividing originals and scanning them separately with the ADF to form
a single file, select
[
Set Wait Time
]
or
[
Continuous Wait
]
for the waiting status.
• Continuous Wait
•
Set Wait Time: 60sec.
This setting is valid if
[
SADF
]
is specified for
[
Original Feed Type
]
when scan-
ning.
If
[
Set Wait Time
]
is selected, enter the wait time in seconds (3-999) for placing
additional originals with the number keys. Scanning will start automatically
if additional originals are placed within this time. You can end scanning and
begin transmission by pressing the
{
q
}
key within this time. Once the spec-
ified time has elapsed, transmission starts automatically.
If
[
Continuous Wait
]
is selected, the machine will wait for the additional origi-
nals until the
{
q
}
key is pressed. Scanning will start when additional origi-
nals are placed and the
{
Start
}
key is pressed. You can end scanning and begin
sending by pressing the
{
q
}
key.
Even if originals are placed on the exposure glass, the machine will operate
according to the specified settings. However, every time originals are placed
on the exposure glass, you must press the
{
Start
}
key to start scanning. Scan-
ning will start if additional originals are placed and the
{
Start
}
key is pressed
within this time. You can end scanning and begin transmission by pressing
the
{
q
}
key within this time. Once the specified time has elapsed, transmis-
sion starts automatically.
If originals are placed in the auto document feeder (ADF), transmission will
start without waiting for additional originals after all originals in the ADF
have been scanned, regardless of the specified settings.
If a paper misfeed occurs or any of the following operations is performed
while the machine is waiting for additional originals, the countdown stops
and does not start again until the
{
q
}
key is pressed.
• Changing the settings such as the scan settings
• Opening the upper cover of the ADF
• Pressing the
{
Interrupt
}
key to activate the copy mode
❖
Background Density of ADS (Full Color)
Characteristics due to the type of paper such as nonwhiteness like newspaper
or transparent originals can be reduced by correcting the scanning density.
Reference
“Batch, SADF”, Scanner Reference
“Items for Specifying Scan Settings”, Scanner Reference
“Setting Items for Original Feed Type”, Scanner Reference
“Scanning Multiple Pages of Originals as One File”, Scanner Reference
Summary of Contents for Aficio MP C2500 EFI
Page 54: ...Connecting the Machine 46 1 ...
Page 202: ...Printer Features 194 5 ...
Page 282: ...Other User Tools 274 8 ...
Page 314: ...306 EN USA B230 7857 ...
