Troubleshooting
81
Load Paper
or Form Feed
/ Paper Size:
Paper Type:
The paper type and size set-
tings for this tray do not match
the size and type of paper actu-
ally loaded.
Load paper into the tray indicated,
then press
{
# Enter
}
key to resume
printing. Or press
{
Form Feed
}
key and
select the tray that holds a different
type of paper. To cancel printing,
press
{
Job Reset
}
key. Then press
{
#
Enter
}
key.
Load Paper: Tray #
or Form Feed
/ Paper Size:
Paper Type:
There is no paper left in this
tray.
#: tray number
Load paper into the tray indicated.
Menu Protected
Cannot change
The menu is protected and the
settings cannot be changed.
Wait for two seconds until the previ-
ous display appears.
No Files exist
There are no files available for
the sample print job or the
locked print job.
Wait for two seconds until the previ-
ous display appears.
No Log exists
The user has selected to print
the error log in the List/Test
Print mode, however no errors
have been detected and so a
log has not been created.
Offline
The printer is offline and cannot
print data.
Press
{
On Line
}
key.
P=XX I=XXXXXXXX
Power Off On
/ If Error Reoccur
Call Service
A controller error. The SC num-
ber indicates the problem.
Turn the power off, and then on. If the
message appears again, call your
sales or service representative.
Paper Invalid
for Duplex:Tray #
/ Change Setting
or Form Feed
A paper setting for the selected
tray is not supported for duplex
printing.
#: tray number
Change the paper setting with the
control panel. Or press
{
Form Feed
}
key several times until a tray with sup-
ported paper settings appears on the
panel display.
Or press
{
Job Reset
}
key to cancel the
print job.
Please wait...
WEP settings are being
changed and updated in this
status message. The printer
device keys are unoperational
during this period.
Wait a while.
The user is urged to wait while
emulation is switching.
Wait a while.
Messages/Second
messages
Description
Solution
