![background image](http://html1.mh-extra.com/html/ricoh/b383/b383_service-manual_1456499112.webp)
28 August, 2000
BIT SWITCHES
4-43
Service
Tables
Printer Switches 0F
No
FUNCTION
COMMENTS
0
to
1
Smoothing feature
Bit 1 Bit 0 Setting
0
0
Disabled
0
1
Disabled
1
0
Enabled
1
1
Not used
(0, 0) (0, 1):
Disable smoothing if the machine
receives halftone images from other
manufacturer’s fax machines frequently.
2
Duplex printing
0:
Disabled
1:
Enabled
1:
The machine always prints received fax
messages in duplex printing mode.
Cross Reference
“Duplex Printing” in chapter 2
3
Binding direction for Duplex
Printing
0
: Left binding
1
: Top binding
Cross Reference
“Duplex Printing” in chapter 2
4
Printing fax messages in user
code mode
0:
Enabled
1:
Disabled
1:
The machine holds the received fax messages
until the machine exits the restricted access mode
using user codes or key counter.
If the machine enters the restricted access mode
again while printing fax messages, the machine
stops printing until the machine exits the mode
again.
Cross reference
User code mode on/off – SP Mode 5-401
5
Not used
Do not change the setting.
6
7
Wait timer for Duplex Print Mode.
0
0
1
0
0
1
1
1
F
HG
I
KJ
=
F
HG
I
KJ
=
F
HG
I
KJ
=
F
HG
I
KJ
No
it
mm
mm
mm
lim
.,
.,
.
1
3
10
If the duplex unit is already being used for a copy or print job when the fax unit is
going to print a fax message in duplex mode, the fax unit waits until the duplex unit
becomes available. The time that the fax unit will wait can be specified, as shown
above. If the timer expires, the message is printed on single sides.