28 August, 2000
BIT SWITCHES
4-49
Service
Tables
Communication Switch 0B
No
FUNCTION
COMMENTS
5
Action when there is no fax
number in the programmed
Quick/Speed dials which
meets the requesting
terminal’s own fax number
0:
Transfer is disabled
1:
Transfer is enabled
After the machine receives a transfer request, the
machine compares the last N digits of the
requesting terminal’s own fax number with all the
Quick/Speed dials programmed in the machine.
(N is the number programmed in communication
switch 0C.)
0:
If there is no matching number programmed in
the machine, the machine rejects the transfer
request.
1:
Even if there is no matching number
programmed in the machine, the machine accepts
the transfer request. The result report will be
printed at the transfer terminal, but will not be sent
back to the requesting terminal.
6
to
7
Not used
Do not change the settings.
Communication Switch 0C
No
FUNCTION
COMMENTS
0
to
4
Number of digits compared to
find the requester’s fax
number from the programmed
Quick/Speed Dials when
acting as a Transfer Station
00 - 1F (0 to 31 digits)
After the machine receives a transfer request, the
machine compares the own telephone number
sent from the Requesting Terminal with all
Quick/Speed Dials programmed in the machine,
starting from Quick Dial 01 to the end of the
Speed Dials.
This number determines how many digits from the
end of the telephone numbers the machine
compares.
If it is set to 00, the machine will send the report
to the first Quick/Speed Dial that the machine
compared. If Quick Dial 01 is programmed, the
machine will send the report to Quick 01. If Quick
Dial 01 through 04 are not programmed and
Quick Dial 05 is programmed, the machine will
send the report to Quick 05.
Default setting - 05(H) = 5 digits
5
to
7
Not used
Do not change the settings.