![background image](http://html1.mh-extra.com/html/ricoh/b383/b383_service-manual_1456499156.webp)
28 August, 2000
SERVICE RAM ADDRESSES
4-87
Service
Tables
480383 to 480385(H)
- Effective term of automatic service calls (Refer to section
2.1.3 for details)
48038C to 48038D(H)
– Modem ROM information
48038C(H) – Modem ROM version (Low)
48038D(H) – Modem ROM version (High)
48038E(H) – Modem ROM checksum value (Low)
48038F(H) – Modem ROM checksum value (High)
480400 to 4804DA(H)
- NCU parameters (Refer to section 4.3 for details)
480A30 to 480A57(H)
- SC codes NOT for automatic service call
If the fax unit receives an SC code from the copier engine other than
programmed in these addresses, the fax unit sends an automatic service call
report to the programmed service station.
Program a SC code in four-digit BCD format as shown in the example below.
Example 1:
SC code ‘192’
Address (High) - 01(BCD)
Address (Low) - 92 (BCD)
Wildcard characters “a” or “A” can be used to specify a series of SC codes.
Example 2:
SC code ‘900 to 999”
Address (High) – 09 (BCD)
Address (Low) – aa or AA (Hex)
Example 3:
SC code ‘330 to 339”
Address (High) – 03 (BCD)
Address (Low) – 3a or 3A (Hex)
- Default settings -
High Address (H)
Data (BCD)
Low Address (L)
Data (BCD)
SC code
480A30
09
480A31
AA
9AA
480A32
FF
480A33
FF
Not programmed
480A34
FF
480A35
FF
Not programmed
480A36
FF
480A37
FF
Not programmed
480A38
FF
480A39
FF
Not programmed
480A3A
FF
480A3B
FF
Not programmed
480A3C
to
480A56
FF(H)
480A3D
to
480A57
FF(H)
Not Programmed