28 August, 2000
PMU BOARD (A818-12)
3-11
Installation
1. Remove the I/F unit cover [A] (4 screws) and the left-side cover [B] (2 screws).
2. Remove the FCU board.
3. Connect the PMU board [C] and the double locking spacer [D] onto the FCU
board [E], as shown.
4. Make sure that the battery switch (SW1) is turned on. Then, insert the FCU/
PMU assembly [F] into the fax unit [G].
5. Reassemble
the
machine.
6. Connect the telephone cable, then plug in the machine and turn on the main
switch.
7. Print the system parameter list and make sure that “PMU” is listed as an option.
A818I509.WMF
A818I511.WMF
A818I017.WMF
[C]
[A]
[B]
[D]
[E]
[F]
[G]