3. Gently pry up the tabs and pry the port cover off.
4. Clean out all the toner from the toner port and the tube.
Fill the tube with toner for use in the Ricoh Aficio C4500 toner
cartridges.
5. Replace the cleaned port cover. Press the white button
assembly from the back so that it is fully extended.
6. To remove the chip, slice off the two corner tabs with a
chisel or sharp knife.
RICOH AFICIO C4500 EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
