background image

155

8

Usin

g t
h

e Blu

eto

ot

h

®

 Fun

ctio

n

You can set the Bluetooth

®

 function or GPS information by 

displaying the Expanded Settings menu from the Shooting Setting 
menu (

G

P.59) or Playback Setting menu (

G

P.88).

The Expanded Settings menu enables you to set the items listed in 
the table below.

This explains how to make the settings.
Use the 

!"$

 buttons and MENU/OK button to select and set an 

item.

1

Press the MENU/OK button.

• The Shooting Setting menu (or the Playback Setting menu) appears.

2

Press the 

$

 button twice.

• The Expanded Settings menu is 

displayed.

Expanded Settings Menu

Setting

Options [Default Settings]

Refer to

GPS DATUM

TOKYO, [WGS-84]

P.188

GPS DISP MODE

[LAT/LON], UTM, MGRS, ALL

P.189

GPS LOCK

[OFF], ON

P.190

PASS KEY

-

P.175

SEARCH COUNT

1, 2, 3, 4, [5], 6, 7, 8, 9, 10

P.176

BT AUTO CONN

ON, [OFF]

P.183

BT SERIAL

-

P.181

MASTER/SLAVE

MASTER, [SLAVE]

P.177

IMAGE FILE SIZE

NO CHANGE, 1280, [640], 320, 160

P.178

AUTO DEL

ON, [OFF]

P.179

QUICK SEND MODE

[OFF], 1TOUCH, 2TOUCH

P.171

Using the Expanded Settings Menu

The menu items are 
provided on three screens.

Summary of Contents for Caplio 500SE
































































































































































































































Reviews: