5
5-38
Setting up the E-820 from a Windows Computer
PS (PostScript) Setup
The options in the PS Setup menu in local Setup are located on the Paper Setup tab in
remote Setup.
N
OTE
:
In the following illustrations, “Device name” represents the model of the copier
connected to the E-820, which is r7.
Halftone Screen Definitions (local Setup only)
(available with the Fiery Graphic Arts Package)
—User Screen 1, User Screen 2, and
User Screen 3 menu items are used to switch between definitions for three user-defined
halftone screens. For each of these screens, you may define frequency (lpi), screen
angles, and dot shapes. Custom allows you to enter PostScript functions for dot shapes.
When Custom is clicked, the dialog box displays information on the last Dot Shape
selected. For example, if Custom is clicked after Square has been previously selected,
the dialog box displays the Dot Shape function associated with Square shapes.
Color Mode
—Specify whether to print color (CMYK) or Grayscale images to the E-820
by default. CMYK gives you full color prints. Select CMYK as the Color Mode before
performing calibration on the E-820. Grayscale converts all colors to shades of gray.