background image

2

2-1

E-820 on a TCP/IP network with Windows NT 4.0/2000/XP

This chapter describes environments that typically include one or more network 
servers—Novell NetWare servers and Windows NT 4.0/2000 servers—that share 
printing to the E-820. It describes setting up servers that use IPX/SPX or TCP/IP 
protocols for communicating with the E-820. In addition, it includes guidelines for 
setting up direct communication from Windows NT 4.0/2000/XP workstations or 
UNIX workstations, where a network server is optional. This chapter also outlines the 
requirements for users to print to the E-820 and run Fiery utilities and WebTools.

The E-820 can accept jobs concurrently from NetWare, Windows NT 4.0/2000, 
and AppleShare servers, as well as jobs sent directly from Windows NT 4.0/2000/XP 
or UNIX  workstations. Because AppleShare servers require no special configuration, 
they are not discussed in this chapter, except for use in a Windows NT 4.0/2000 
environment (see 

“E-820 on a TCP/IP network with Windows NT 4.0/2000/XP”

 in 

the following section).

If your network is based on Windows NT 4.0/2000, proceed to the following section. 
For information on UNIX workstations, proceed to 

page 2-17

.

E-820 on a TCP/IP network with 
Windows NT 4.0/2000/XP

When a Windows NT 4.0/2000/XP computer is configured to connect to the E-820 
using TCP/IP, it can print directly to the E-820. If the computer shares the printer over 
the network, it is acting as a print server to Windows NT 4.0/2000/XP and 
Windows 9x/Me clients. Client computers print to the E-820 by printing to the 
Windows NT 4.0/2000 print server. You can then monitor and control printing at 
the Windows NT 4.0/2000 server computer.

Typical system combinations are:

• Print server running Windows NT 4.0/2000 Server; clients running 

Windows NT 4.0/2000/XP Workstation and Windows 9x/Me

• Print server running Windows NT 4.0/2000/XP Workstation; clients running 

Windows 9x/Me

Chapter 2:
Setting up 
Network Servers

Summary of Contents for Fiery E-820































































































































































































Reviews: