2
G
etting S
tar
ted
40
Initial Settings
Turn the camera on and make the initial settings.
Turning the Camera On
1
Press the power button.
The power button lamp lights, and then the
status lamp blinks for several seconds.
The first time the camera is turned on after
purchase, the [Language/
H
] screen ap-
pears.
When the power button is pressed again, the
power turns off.
Turning the Camera On in the Playback Mode --------------------------------------------------------
•
When
g
is pressed and held with the camera turned off, the camera turns on in the playback mode.
The following operations are available.
g
Turns off the power of the camera.
Press
z
halfway
Switches the camera to the shooting mode.
Turning the Camera On with the Wi-Fi Function Enabled ------------------------------------------
•
When
g
is pressed and held with the camera turned off until a beep sounds, the camera turns on
with the Wi-Fi function enabled. (p.115)
•
When the Wi-Fi function is enabled using
g
, the camera is not switched to the shooting mode even
if
z
is pressed. When performing shooting or other operations, press
g
to turn the camera
off and press the power button to turn the camera back on.
Memo ---------------------------------------------------------------------------------------------------------
•
The power button lamp can be set to [Off] in [Power Button Lamp] of the
E
4 menu. (p.129)
•
If no operations are made for approximately one minute, the camera turns off automatically to sup-
press battery drain. The power saving function can be set in the
E
7 menu. (p.130)
•
The number of images taken on the day (except the deleted images) is displayed when the power
is turned off.
e_kb588_om.indb 40
2018/08/07 10:01:01