6
Chang
ing the S
ettings
132
Dimming the Display
The camera dims the display automatically if
no operations are performed during the set
time. The following settings can be set in the
E
7 menu.
Sleep Mode
Turns off the monitor automatically if no operations are performed during the
set time. The status lamp lights in the sleep mode.
[1min.], [3min.], [5min.], [10min.], [30min.], or [Off] can be set.
LCD Auto Dim
Dims the display automatically if the camera is not moved within five seconds.
[On] or [Off] can be set.
If the camera is operated, the original brightness is restored.
Memo ---------------------------------------------------------------------------------------------------------
•
[Sleep Mode] is not available in the following cases.
•
During shooting with [Interval Shooting] or [Interval Composite] of [Drive Mode]
•
During movie recording or playback
•
While an AV device is connected to the camera
•
While the camera is connected to a communication device with the Image Sync
•
[LCD Auto Dim] is not available in the following cases.
•
During Instant Review
•
In the playback mode
•
While an AV device is connected to the camera
Power Supply Settings
Sleep Mode
1min.
1min.
On
LCD Auto Dim
Auto Power Off
About This Device
Certification Marks
Pixel Mapping
Dust Removal
Downloaded from