7
A
ppendix
140
AC Adapter
If you intend to use the camera continuously for a long period, the use of the
AC adapter (D-AC166) is recommended.
1
Make sure that the camera is turned off, and open the terminal
cover.
2
Connect the USB cable (Type-C) of
the AC adapter to the USB terminal of
the camera.
3
Connect the AC plug cord
to the AC adapter, and
plug the cord into the
power outlet.
4
Turn the camera on.
Caution -------------------------------------------------------------------------------------------------------
•
Securely connect the power plug and AC plug cord.
•
When the camera is not used, unplug the AC adapter from the power outlet and disconnect it from
the camera.
•
If the AC adapter is disconnected from the camera or the power plug is unplugged from the power
outlet during use of the camera, the data may be lost.
•
Do not move the camera by holding the AC adapter cable while the AC adapter is used.
•
The AC adapter may not be usable depending on the country and region.
Downloaded from