![background image](http://html1.mh-extra.com/html/ricoh/hl-f1/hl-f1_field-service-manual_1456537147.webp)
The current customizing code appears.
2. Enter the desired customizing code. The newly entered code appears.
• The machine does not work properly when an incorrect code is entered.
3. Press the "Start" key.
The machine saves the setting and appears the "PARAMETER INIT" on the LCD.
The machine returns to the initial stage of the maintenance mode.
If you press the "Stop/Exit" key or no keys are pressed for one minute in the above procedure, the
machine stops the procedure and returns to the initial stage of the maintenance mode.
Display of the Equipment's Log Information (Function code 80)
Function
The equipment may display its log information on the LCD.
Operating Procedure
1. Press the "8" and "0" keys in this order in the initial stage of the maintenance mode.
The USB serial number appears on the LCD.
2. Press the "Start" key. Each time the "Start" key is pressed, one of the following log information items
appears on the LCD in the order given below.
• 1) Jam count, indicating how many times a paper jam has been occurred
• 2) Page count, indicating how many pages the photosensitive drum has been printed
• 3) Total page count, indicating how many pages the equipment has been printed since produced
• 4) Drum count, indicating how many times the photosensitive drum has been rotated
• 5) Drum change count, indicating how many times drum replacement has been made
• 6) Toner change count, indicating how many times toner replacement has been made
• 7) Copy page count, indicating how many copies have been made
• 8) PC print page count, indicating how many pages the equipment has been printed as an output
device of the connected PC
• 9) FAX page count, indicating how many received FAX pages have been printed
• 10) Error code of the most recent machine error *1
• 11) Error code of the most recent communications error *2
• 12) ADF jam count, indicating how many times a document jam has been occurred
• 13) ADF page count, indicating how many documents have been fed
Detailed Description of Maintenance-Mode Functions
145
5
Summary of Contents for HL-F1
