Using the Control Panel
42
4
11Print Priority (setting
the multi-accessing func-
tion)
Sets the print priority for each mode.
• “Copier”
Print priority is given to the copy function.
• “Fax”
Print priority is given to the fax function.
• “Printer”
Print priority is given to the printer function.
• “Interleave”
Prints jobs in the order in which they are initiated regardless
of mode/function.
• “Display”
Print priority is given to the mode displayed on the display.
Note
❒
Default:
Copier
Reference
See
“Multi-access”
in the System Settings manual.
13Key Operators Tools
(13Key Op. Tools)
Used to view or print counters, and set up user codes. If you have
registered the access code and set“3.Key Op. Access”to “On”, you
cannot use this function unless entering the correct code.
Reference
“4.Prog. Key Op. Code” and “3.Key Op. Access”.
1.Show Counter
View counter values on the panel display.
• Total Pages
• Printer (for machines with optional printer function)
• Copier
• Fax (for machines with optional fax function)
• A3 size
• 2 Sided Prints (Type 3 only)
2.Print Counter
Print counter lists.
Limitation
❒
15 ppm model requires the optional 16MB copier memory unit
when using this function.
3 Key Operator Access
(3.Key Op. Access)
Turn the key operator access code “On” or “Off”. If you select
“On”, the registered access code is required for using all applica-
tions.
Note
❒
Default: Off
Reference
See “4.Prog. Key Op. Code”
Menu
Description
