- 11 -
Image Scanner User's Manual
¡
Placing an original on the contact glass
Original condition
Originals that meet the following specifications can be scanned.
E
Weight:
Less than 10 kg per document (Letter or A4)
E
Thickness:
Less than 10 mm (If document feeder is open, more than 10 mm is possible.)
E
Written material: Pencil, toner, ink, ball point pen, anything that does not stick to the contact
glass.
Document set origin
2. Put the original face down on the contact
glass. Place the upper left edge of the origi-
nal at the document set origin.
3. Close the document feeder slowly.
Caution:
Keep your fingers away from the
hinge when closing the document
feeder.
1. Open the document feeder.
Caution:
Don't press on the contact glass
strongly, otherwise it might break.
Procedures
Placing
originals
03_IS430-BODY
97.5.8, 5:36 PM
Page 11
PageMaker 5.0J
