Ricoh M C240FW User Manual Download

Page: 173 / 235

Troubleshoot a problem

173

Action

Yes

Step 2

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store paper in its

original wrapper until you use it.

Print the document.

Do dark lines appear on prints?

Go to step 3.

The problem is

solved.

Step 3

Open the front door, and then firmly push it down.

Pull out the print cartridge tray.

Remove, and then insert the print cartridges.

Insert the print cartridge tray, and then close the door.

Print the document.

Do dark lines appear on prints?

Go to step 4.

The problem is

solved.

Step 4

Perform Color Adjust.
From the control panel, navigate to:

Settings

Print

Quality

Advanced Imaging

Color Adjust

Print the document.

Do dark lines appear on prints?

Contact

customer

support

The problem is

solved.

Summary of Contents for M C240FW












































































































































































































































Search results

Summary of Contents for M C240FW

Reviews:

Related manuals for M C240FW

Brands by name

Popular brands

Ricoh M C240FW, User Manual

Search results

Summary of Contents for M C240FW

Reviews:

Related manuals for M C240FW

Brands by name

Popular brands