Notices
226
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for
Class I (1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of
IEC 60825-1: 2014 (JIS C 6802:2018).
Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is
never any human access to laser radiation above a Class I level during normal operation, user maintenance, or
prescribed service conditions. The printer has a non-serviceable printhead assembly that contains a laser with the
following specifications:
Class: IIIb (3b) AlGaAs
Nominal output power (milliwatts): 8
Wavelength (nanometers): 770–800
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note:
Some modes may not apply to your product.
Mode
Description
Power consumption
(Watts)
Printing
The product is generating hard-copy output from electronic inputs.
One-sided: 385
Two-sided: 260
Copy
The product is generating hard-copy output from hard-copy original
documents.
385
Scan
The product is scanning hard-copy documents.
22
Ready
The product is waiting for a print job.
17
Sleep Mode
The product is in a high-level energy-saving mode.
1.1
Hibernate
The product is in a low-level energy-saving mode.
N/A
Off
The product is plugged into an electrical outlet, but the power switch is
turned off.
0.1
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
