Ricoh M052 Service Manual Download

Page: 356 / 661

System SP8-xxx

M052/M053/M054 5-140

8 391

LSize PrtPGS

*CTL

[0 to 9999999/

/ 1]

These SPs count pages printed on paper sizes A3/DLT and larger.

Note

: In addition to being displayed in the SMC Report, these counters

are also displayed in the User Tools display on the copy machine.

8 401

T:PrtPGS/LS

*CTL

These SPs count the number of pages printed

from the document server. The counter for the

application used to print the pages is

incremented.

The L: counter counts the number of jobs

stored from within the document server mode

screen at the operation panel.

[0 to 9999999/

/ 1]

8 402

C:PrtPGS/LS

*CTL

8 403

F:PrtPGS/LS

*CTL

8 404

P:PrtPGS/LS

*CTL

8 405

S:PrtPGS/LS

*CTL

8 406

L:PrtPGS/LS

*CTL

Print jobs done with Web Image Monitor and Desk Top Binder are added to the L: count.

Fax jobs done with Web Image Monitor and Desk Top Binder are added to the F: count.

8 411

Prints/Duplex

*CTL

This SP counts the amount of paper

(front/back counted as 1 page) used for duplex

printing. Last pages printed only on one side

are not counted.

[0 to 9999999/

/ 1]

Summary of Contents for M052






















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands

Ricoh M052, Service Manual

Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands