Ricoh M052 Service Manual Download

Page: 370 / 661

System SP8-xxx

M052/M053/M054 5-154

8 641

T:IFAX TX PGS

*CTL

[0 to 9999999/

/ 1]

These SPs count by color mode the number of pages sent by fax to as fax

images using I-Fax.

8 643

F:IFAX TX PGS

*CTL

[0 to 9999999/

/ 1]

These SPs count by color mode the number of pages sent by Fax as fax

images using I-Fax.

8 64x 1 B/W

If a document has color and black-and-white pages mixed, the pages are counted

separately as B/W or Color.

At the present time, this feature is provided for the Fax application only so SP8641 and

SP8643 are the same.

The counts include error pages.

If a document is sent to more than one destination with a Group transmission, the count is

done for each destination.

Polling transmissions are counted but polling RX are not.

Relay, memory, and confidential mailbox transmissions and are counted for each

destination.

8 651

T:S-to-Email PGS

*CTL

[0 to 9999999/

/ 1]

These SPs count by color mode the total number of pages attached to an

e-mail for both the Scan and document server applications.

8 655

S:S-to-Email PGS

*CTL

[0 to 9999999/

/ 1]

These SPs count by color mode the total number of pages attached to an

e-mail for the Scan application only.

8 65x 1 B/W

8 65x 2 Color

The count for B/W and Color pages is done after the document is stored on the HDD. If

the job is cancelled before it is stored, the pages are not counted.

If Scan-to-Email is used to send a 10-page document to 5 addresses, the count is 10

Summary of Contents for M052






















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands

Ricoh M052, Service Manual

Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands