Ricoh M052 Service Manual Download

Page: 395 / 661

Printer Service Mode

SM 5-179

M052/M053/M054

Syste

Ref

eren

Enable: Changes the maximum number of jobs that can be stored on the

HDD via Job Type settings to 1000. The default is 100.

bit

DFU

bit 6

Method for determining the image

rotation for the edge to bind on.

0: Disable

1: Enable

If enabled, the image rotation will be performed as they were in the

specifications of older models for the binding of pages of mixed orientation

jobs.

The old models are below:

- PCL: Pre-04A models

- PS/PDF/RPCS:Pre-05S models

bit 7

Letterhead mode printing

0: Disable

1: Enable

(Duplex)

Routes all pages through the duplex unit.

If this is disabled, simplex pages or the last page of an odd-paged duplex

job are not routed through the duplex unit. This could result in problems

with letterhead/pre-printed pages.

Only affects pages specified as Letterhead paper.

1001

Bit Switch

006 Bit Switch 6

DFU

- -

1001

Bit Switch

007 Bit Switch 7

bit 0

Print path

0: Disable

1: Enable

If enabled, simplex pages (in mixed simplex/duplex PS/PCL5 jobs only)

and the last page of an odd paged duplex job (PS, PCL5, PCL6) are

always routed through the duplex unit. Not having to switch paper paths

increases the print speed slightly.

bit 1

to 7

DFU -

Summary of Contents for M052






















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands

Ricoh M052, Service Manual

Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands