Ricoh M052 Service Manual Download

Page: 562 / 661

Bit Switches

M381 56

System Switch 1E [SP No. 1-101-031]

FUNCTION

COMMENTS

Communication after the

Journal data storage area has

become full

0: Impossible

1: Possible

0: When this switch is on and the journal history

becomes full, the next report prints. If the journal

history is not deleted, the next transmission cannot

be received. This prevents overwriting

communication records before the machine can

print them.

1: If the buffer memory of the communication

records for the Journal is full, fax communications

are still possible. But the machine will overwrite

the oldest communication records.

Note: This setting is effective only when Automatic

Journal printout is enabled but the machine cannot

print the report (e.g., no paper).

Action when the SAF memory

has become full during

scanning

0: The current page is erased.

1: The entire file is erased.

0: If the SAF memory becomes full during

scanning at the memory transmission, the

successfully scanned pages are transmitted.

1: If the SAF memory becomes full during

scanning at the memory transmission, the file is

erased and no pages are transmitted.

This bit switch is ignored for parallel memory

transmission.

RTI/CSI display priority

0: RTI 1: CSI

This bit determines which identifier, RTI or CSI, is

displayed on the LCD while the machine is

communicating in G3 non-standard mode.

File No. printing

0: Enabled

1: Disabled

1: File numbers are not printed on any reports.

NOTE:

The file numbers may not be printed in the

sequential order. If a customer does not like this

numbering, select "0".

Summary of Contents for M052






















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands

Ricoh M052, Service Manual

Search results

Summary of Contents for M052

Reviews:

Related manuals for M052

Brands by name

Popular brands