24
PE-MF3/PE-P2 Training
Slide 24
Main Specifications – MFP Model (1)
Warm-up time:
PE-MF3c: 30 sec (PE-MF2c: 48 sec)
PE-MF3a: 30 sec (PE-MF1a: 51 sec)
First copy speed: 30 seconds
First print speed: Less than 14 seconds
Paper Input Capacity:
250 sheets (standard tray)
1 sheet (bypass tray)
500 sheets (optional paper tray unit)
Paper Output Capacity: 150 sheets
Paper Weight
Standard and bypass trays: 60 - 160g/m2, 16lb - 40lb Bond
Optional paper tray unit: 60 - 105g/m2, 16lb - 28lb Bond
Duplex: 60 - 90g/m2, 16lb - 24lb Bond
These specs are the same as the previous model, except for the warm-up time.
The reason for the faster warm-up time will be explained later.
Why is 1st copy time so much slower than the 1st print time?
¾
Scanner initialization and movement to the start position takes more time.
Duplex printing speed is about 60% of the normal printing speed)
¾
Duplex printing cannot be done for thick paper (more than 90 g/m
2
).
Printing on OHP transparencies is not possible.
