6.Troubleshooting
295
SC900 (Others)
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC900-00
D
Electronic counter error
The electronic total counter value is not the specified value.
This error is detected when the counter moves forward.
The NVRAM connection is not correct.
The NVRAM is defective.
The NVRAM data is corrupted.
The data was written in the wrong area due to external factors.
When PRT received signals at SRM, the requested count is not completed.
Replace the NVRAM.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC990-
00
D
Software performance error
The software attempted to make an unexpected operation.
Incorrect argument
Incorrect internal parameter
Insufficient working memory
Abnormal performance caused by an error that cannot be detected in normal SC detection
due to hardware specifications.
Turn the main power switch off and on.
Reinstall the software of the controller board.
Reinstall the software of the engine board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC991-
00
C
Software Error (Operation Can Continue)
The software performed in an unexpected way. By taking recovery measures, further operation
is possible.
The parameter is invalid.
There is insufficient work memory.
This SC is caused by errors that are not normally detected from the hardware.
Not required
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC992-00
D
Undefined SC
An undefined SC has occurred.
There is a bug in the software.
Summary of Contents for M0A0
