Ricoh M160 Service Manual Download

Page: 599 / 836

Main SP Tables-8

M160/M161

3-186

SM Appendix

8381

[T:Total PrtPGS]

[0 to 99999999 /

/ 1/step]

These SPs count the number of pages

printed by the customer. The counter

for the application used for storing the

pages increments.

8382

[C:Total PrtPGS]

8383

[F:Total PrtPGS]

8384

[P:Total PrtPGS]

8385

[S:Total PrtPGS]

8386

[L:Total PrtPGS]

8387

[O:Total PrtPGS]



When the A3/DLT double count function is switched on with SP5-104, 1 A3/DLT page is

counted as 2.



When several documents are merged for a print job, the number of pages stored is counted

for the application that stored them.



These counters are used primarily to calculate charges on use of the machine, so the

following pages are not counted as printed pages:

- Blank pages in a duplex printing job.

- Blank pages inserted as document covers, chapter title sheets, and slip sheets.

- Reports printed to confirm counts.

- All reports done in the service mode (service summaries, engine maintenance reports, etc.)

- Test prints for machine image adjustment.

- Error notification reports.

- Partially printed pages as the result of a copier jam.

8391

LSize PrtPGS

[0 to 99999999 /

/ 1/step]

These SPs count pages printed on

paper sizes A3/DLT and larger.

Note:

In addition to being displayed in

the SMC Report, these counters are

also displayed in the User Tools display

on the copy machine.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands