Ricoh M160 Service Manual Download

Page: 678 / 836

Error Codes

M160/M161 Fax Option

Code

Meaning

Suggested Cause/Action

14-17

Incorrect Ticket

Update the software because of the defective

software.

14-18

Access to MCS File Error



The access to MCS file is denied due to

the no permission of access.



Update the software because of the

defective software.

14-20

SMTP Authentication error

Make sure the administrator's e-mail address is

same as the SMTP authentication address or

POP before SMTP address.

14-21

Transmission error of S/MIME Register the correct user certificate and device

certificate.

14-22

Destination certificate is

invalid in S/MIME

transmission.

14-23

Device certificate is invalid in

S/MIME transmission.

14-24

Destination and device

certificate is in valid in

S/MIME.

certificate.

14-30

MCS File Creation Failed

Failed to create the MCS file because:



The number of files created with other

applications on the Document Server has

exceeded the limit.



HDD is full or not operating correctly.



Software error

14-31

UFS File Creation Failed

UFS file could not be created:



Not enough space in UFS area to handle

both Scan-to-Email and IFAX transmission



HDD full or not operating correctly



Software error

14-32

Cancelled the Mail Due to

Error Detected by NFAX

Error detected with NFAX and send was

cancelled due to a software error.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands