Ricoh M160 Service Manual Download

Page: 680 / 836

Error Codes

M160/M161 Fax Option

Code

Meaning

Suggested Cause/Action

15-10

DCS Mail Receive Error

Error other than 15-11 to 15-18.

15-11

Connection Error

The DNS or POP3/IMAP4 server could not be

found:



The IP address for DNS or POP3/IMAP4

server is not stored in the machine.



The DNS IP address is not registered.



Network not operating correctly

15-12

Authorization Error

POP3/IMAP4 send authorization failed:



Incorrect IFAX user name or password



Access was attempted by another device,

such as the PC.



POP3/IMAP4 settings incorrect

15-13

Receive Buffer Full

Occurs only during manual reception.

Transmission cannot be received due to

insufficient buffer space. The buffer is being

used for mail send or Scan-to-Email.

15-14

Mail Header Format Error

The mail header is not standard format. For

example, the Date line description is incorrect.

15-15

Mail Divide Error

The e-mail is not in standard format. There is

no boundary between parts of the e-mail,

including the header.

15-16

Mail Size Receive Error

The mail cannot be received because it is too

large.

15-17

Receive Timeout

May occur during manual receiving only

because the network is not operating correctly.

15-18

Incomplete Mail Received

Only one portion of the mail was received.

15-31

Final Destination for Transfer

Request Reception Format

Error

The format of the final destination for the

transfer request was incorrect.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands