Operating Instructions
Administrator Reference
109
SmartNetMonitor for Admin
AAAA
Run SmartNetMonitor for Admin.
BBBB
Click the
[
Group
]
menu, point to
[
Search Device
]
, and select
[
TCP/IP
]
or
[
IPX/SPX
]
. A list of print-
ers appears.
Note
❒
Select the protocol of the printer you want to change its configuration.
CCCC
On the list, Select a printer whose Network Interface Board you want to change its configura-
tion.
DDDD
From the
[
Tools
]
menu, select
[
NIB Setup Tool
]
.
The NIB Setup Tool starts up.
EEEE
Select
[
Property Sheet
]
, and then click
[
OK
]
.
TCP/IP
A
Click the
[
General
]
tab, and then type the device name into the
[
Device Name
]
box and com-
ment into the
[
Comment
]
box.
•
In the
[
Device Name
]
box, type the name of the printer within 13 characters. The factory de-
fault name consists of "RNP" and the last 3 bytes of the MAC address on the Network Inter-
face Board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default
name is "RNP627DD5". No name of 9 characters is permitted if the prefix is "RNP". Also,
when DHCP is selected as an IP address setting, the number of characters is limited to 13
characters.
•
In the
[
Comment
]
box, type any comment on printers within 31 characters.
