iii
Cautions Concerning Disc Cleaning
•
Remove the disc by pressing the eject button.
•
Use compressed air to clear dust from the drive. (Spray the com-
pressed air for about 5 seconds). (See Fig. 1)
•
Check to see if there is dirt on the surface of the disc. Be careful not
to touch the disc with the fingers when doing this. (See Fig. 2)
•
After cleaning the disc with compressed air, place it on the disc tray
and mount it.
We suggest using Perfect Duster II (80z.) as compressed air for clean-
ing.
Other Cautions
•
When moving the equipment, make sure that the disc has been re-
moved from the drive.
•
When connecting connectors, make sure that the power is OFF. If
the power is ON, there is a possibility of short circuit.
•
When not using the drive for a long period, dust may adhere to the
disc tray. Before using the drive again, use dry air cleaner to remove
the dust from the tray.
Fig. 1
Fig. 2
Fig. 3
Disc tray
Check
Recording surface
