2
MP 7060A Series
1. System environment
This unit can be operated in the system environment explained here.
CPU
166MHz (or faster) Pentium
Memory
Windows 98/95: 32MB or greater.
Windows NT Workstation Ver. 4.0: 32MB or
greater (64MB or more recommended)
Harddisk
Hard disk with average access time of
19msec or less, and data transfer speed of
1,200KB/sec or greater. 75MB or more free
space.(The free space needed for writing de-
pends on the quantity of data.)
*
1
Interface
Enhanced-IDE interface (as Primary Slave,
Secondary Master, or Slave)
Drive bay
5.25-inch half height bay required
Power
+5V/+12V power socket required
Software Required OS
Windows 98/95, Windows NT Workstation Ver.
4.0 (Service Pack 3) or later
CD-R, CD-RW discs
Ricoh, Mitsubishi Chemical, Taiyo Yuden,
Mitsui Chemicals, Ritek, CMC, Princo, TDK
or Kodak discs are recommended.
Occasionally the CD-R and CD-RW discs written by the CD-R/RW drive
cannot be read by other CD drives*
2
. These unreadable discs should be
read using the CD-R/RW drive.
*
1
For write at 6X speed, average access time of 12 msec or less and data
transfer speed of 5 MB/sec or greater are recommended.
*
2
The disc written using the CD-R/RW drive may not be readable by CD-
ROMs other than Multi-read compatible (Random UDF compatible) CD-
ROMs.
Multiread compatible (Random UDF compatible) CD-ROMs are:
(1)
CD-ROMs that can read low reflectance
(2)
CD-ROMs that support Packet Write.
System
requirements
