18
MP 7060S Series
5.2 Disc ejection
(1)
Press the eject button
(2)
Slowly take the disc out of the disc tray
(3)
Press the eject button or push the disc tray and the tray will be inserted
back into the drive.
After ejecting the disc, return the tray inside the unit quickly. When the
tray is in the ejected position, dust and other debris will enter, possibly
causing read errors, write errors, or drive failure.
5.3 Emergency Eject
This drive has a function that allows the CD to be ejected manually if this
becomes necessary in an emergency such as failure of the drive or a power
outage. Follow the following procedures in such a case.
Don't use this feature except in an emergency.
(1)
Turn the power to OFF.
(2)
Poke a fine tipped object into the small hole above the eject button. The
front door pops open and the disk tray comes partway out.
(3)
Pull the front door to open it all the way, then grip the disc tray between
thumb and forefinger and gently pull it straight out.
This feature is a last measure to be used only in an emergency. Using it
excessively will cause malfunction.
*
If you cannot get a good grip on the disc tray with your fingers, use a
steel binder clip or spring clamp to pull it out.
