4.
Busy indicator
The indicator stays green when the medium is being accessed or being read. Or, it stays red during the writing
time, or stays orange when the drive is in the wait state.
5.
Eject button
This is the button used to eject or insert in the disc tray.
This drive has a function that allows the disc to be ejected manually if this becomes necessary in an emergency
such as failure of the drive or a power outage.
Caution
This feature is a last measure to be used only in an emergency. Using it excessively will cause
malfunction.
Rear panel
1.
Digital Audio Output Connector
Provides output to a sound card (Digital signal).
* No dedicated digital audio cable is supplied with the MP7320A.
2.
Analog Audio Output Connector
Provides output to a sound card (Analog signal).
3.
Jumper Connector
This jumper determines whether the drive is configured as a master or slave. Changing the master-slave
configuration takes effect after power-on reset.
