Bypass Feed Slot
When a sheet of paper is placed in the bypass feed slot, the bypass feed sen-
sor is turned on. The machine turns the paper feed motor counter-clockwise
to prefeed the paper until the registration sensor [A] is turned on, or for 1 sec-
ond, whichever is first.
The paper feed clutch [B] is kept off to prevent any drive from being transmit-
ted to the paper feed rollers for the standard cassette when the paper feed
motor turns counter-clockwise.
If a sheet of paper remains in the bypass feed slot for longer than the Auto
Reset Time (System Switch 0B), the machine will automatically feed it out.
The machine will not print incoming messages while there is a sheet of paper
in the bypass feed slot, so feeding out the page after the Auto Reset Time al-
lows incoming faxes to be printed even if someone leaves paper in the
bypass feed slot.
Sheets of paper longer than about 60 cm cannot be fed from the bypass feed
slot, or a paper jam will occur (error code 9-81).
Note that the bypass feed slot can only be used for copying and for printing
from the PC using the optional printer interface.
[A]
[B]
H521D019.wmf
May 22nd, 1995
DETAILED SECTION DESCRIPTIONS
PRINTING
2-43