3
Shoo
ting
68
t
Memo
• The bracket value can be set in increments of [1/3 EV Steps]
or [1/2 EV Steps] according to the setting of [EV Steps] in the
E
5 menu.
• The number of shots and bracket value can also be changed
on the [Drive Mode] screen.
You can take three images continuously by changing the
aperture value step by step without changing the exposure.
This drive mode can be selected only in
J
or
K
mode.
1
Select [Depth of Field Bracketing] on the [Drive]
screen.
2
Set the bracket value.
Available operations
3
Press
E
.
The camera returns to the standby mode.
4
Shoot.
Three images are taken with one release of the shutter.
The camera returns to the standby mode.
t
Memo
• The bracket value can be set in increments of [1/3 EV Steps]
or [1/2 EV Steps] according to the setting of [EV Steps] in the
E
5 menu.
u
Caution
• [Depth of Field Bracketing] cannot be selected when a lens
with an
9
position is used with the aperture ring set to a
position other than
9
.
Depth of Field Bracketing
R
Changes the bracket value.
M
Resets the bracket value to the default
setting.
Larger bracket
value
Takes an image with a deep depth of
field based on the current aperture value.
Smaller bracket
value
Takes an image with a shallow depth of
field based on the current aperture value.
-1.0STOP
-1.0STOP
Cancel
Cancel
OK
OK
Drive
Drive
Depth of Field Bracketing
Depth of Field Bracketing
Summary of Contents for Pentax K-3 III
Page 145: ...Memo ...
Page 146: ...Memo ...
