1
12
Introduction
t
Memo
• The items that can be selected vary depending on the current
camera setup.
• If no operations are made within 1 minute while the control
panel is displayed, the camera returns to standby mode.
• You can change the display color of the status screen, control
panel and menu cursor in [Display Color] of [LCD Display] in
the
D
You can change the type of information displayed in standby
mode by pressing
G
while the control panel is displayed.
Use
CD
to select the type and press
E
.
When shooting with the viewfinder
When shooting with Live View
t
Memo
• The status screen is always displayed when the camera is
turned off and on again. If [Shooting Info Display] is set to [On]
in [Memory] of the
A
4 menu, the screen selected on the
Shooting Info Display selection screen appears when the
camera is turned off and on again. (p.81)
12
Peripheral Illumination
13
Diffraction Correction
14
15
AF Mode (p.49)/Contrast
16
17
18
High-ISO NR (p.46)
19
Slow Shutter Speed NR
20
21
JPEG Recorded Pixels
22
23
Shake Reduction (p.20)/
24
25
Framerate (p.38)
26
Recording Sound Level
27
Current date and time
28
Shooting Info Display
Status Screen
Displays the settings for shooting with the
Display Off
Nothing is displayed on the monitor.
Electronic
Compass
The current latitude, longitude, altitude,
direction, Coordinated Universal Time (UTC),
capture mode, and exposure value are
displayed. Turn the camera off and on again to
return to the status screen.
Available only when the optional GPS unit is
attached to the camera and is operating. (p.94)
Standard
Information
Display
The Live View image and the settings for
shooting with Live View are displayed. (p.11)
No Information
Display
Certain icons, such as those for the capture
mode and drive mode, are not displayed.
e_kb558_om.book Page 12 Tuesday, September 16, 2014 11:59 AM