3
53
Shooting
You can precisely fine tune your lenses with the camera’s
autofocus system.
1
Select [25 AF Fine Adjustment] in
E
4 menu and
press
D
.
The [25 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press
E
.
3
Select [Setting] and adjust
the value.
Available operations
4
Press
E
.
The adjustment value is saved.
5
Press
F
twice.
The camera returns to standby mode.
You can choose from the following drive modes.
u
Caution
• There are restrictions on some drive modes when used
in some capture modes or in combination with some other
t
Memo
• Only
4
(Remote Control Off) or
Q
can be selected in
C
mode.
• The Drive Mode setting is saved even after the power is
turned off. If [Drive Mode] is set to [Off] in [Memory] of the
A
4
menu, the setting returns to Single Frame Shooting when the
power is turned off. (p.81)
AF Fine Adjustment
E
4
Apply All
Applies the same adjustment value to all lenses.
Apply One
Saves an adjustment value for the lens being
used. (Up to 20 values)
D
/
V
to the right
Adjusts the focus to a closer position.
C
/
V
to the left
Adjusts the focus to a farther position.
M
Resets the adjustment value to the
default setting.
±0
±0
±0
±0
3
3
25
25 AF Fine Adjustment
AF Fine Adjustment
Apply One
Apply One
Setting
Setting
Reset Individual Settings
Reset Individual Settings
OK
OK
Cancel
Cancel
Setting the Drive Mode
Z
Single Frame Shooting
(
L
)
Normal capture mode
Continuous Shooting
(
Z
/
b
)
Continuously takes pictures while
0
is kept pressed.
The framerate varies according to
the shutter speed.
Self-timer
(
O
/
P
)
Releases the shutter about
12 seconds or 2 seconds after
0
is pressed.
Remote Control
(
Q
/
R
)
Enables shooting with remote
control.
Select from [Remote Control] or
[Remote Control (3 sec. delay)].
Exposure Bracketing
(
T
)
Takes three consecutive images at
different exposure levels.
e_kb558_om.book Page 53 Tuesday, September 16, 2014 11:59 AM
