5
83
Settings
5
After entering the text, move the text selection
cursor to [Finish], and press
E
.
The screen of Step 2 reappears.
6
Press
F
twice.
t
Memo
• A folder with a new number is created when the folder name
is changed.
• A maximum of 500 images (100 images for Eye-Fi card) can
be stored in a single folder. When the number of captured
images exceeds 500, a new folder is created with the number
following the number of the folder currently being used.
In Exposure Bracketing shooting, images will be stored
in the same folder until shooting is completed.
• When [Create New Folder] is selected in the
D
2 menu,
a folder is created with a new number when the next image
is saved.
• When [Select multiple images] or [Select a folder] of [RAW
Development] is selected, a folder with a new number is
created, and the JPEG images are stored in it. (p.75)
u
Caution
• The maximum folder number is 999. After the folder number
reaches 999, you cannot capture new images if you attempt
to change the folder name or create a new folder, or when
the file name number reaches 9999.
One of the following string of characters is used as the file name
prefix depending on the [21 Color Space] setting of the
E
3 menu.
The first four characters can be changed to a character string
of your choice.
1
Select [File Name] in
D
2 menu and press
D
.
The [File Name] screen appears.
2
Select
A
or
C
and
press
D
.
The text-entry screen appears.
3
Change the text.
Up to 4 single-byte alphanumeric characters can be
entered.
Refer to Steps 4 and 5 of “Folder Name” (p.82)
for how to enter text.
4
Press
F
twice.
File Name
Color Space
File Name
sRGB
IMGPxxxx.JPG
AdobeRGB
_IMGxxxx.JPG
II M
MG
G P
P
.
JPG
.
JPG
.
MOV
I
I M
MG
G P
P
_
_ II M
MG
G
File Name
File Name
e_kb558_om.book Page 83 Tuesday, September 16, 2014 11:59 AM
