1
29
Introduction
E
3
15 Color Temperature Steps
Sets the adjustment steps for the Color Temperature option
of the white balance.
Kelvin
16 Superimpose AF Area
Displays the active AF point in red in the viewfinder.
On
17 AF.S Setting
Sets the action priority for when the autofocus mode is set
to
x
and
0
is fully pressed.
Focus-priority
18 1st Frame Action in AF.C
Sets the action priority for the first frame when the autofocus
mode is set to
y
and
0
is fully pressed.
Release-
priority
19 Action in AF.C Continuous
Sets the action priority during Continuous Shooting when
the autofocus mode is set to
y
.
Focus-priority
20 Hold AF Status
Maintains the focus for a certain amount of time when
the subject happens to move out of the selected focusing
area after being focused.
Off
21 AF with Remote Control
Sets whether to use autofocus when shooting with a remote
control unit.
Off
E
4
22 Release While Charging
Sets whether to release the shutter while the built-in flash
is being charged.
Off
23 Color Space
Sets the color space to use.
sRGB
–
24 Save Rotation Info
Saves rotation information when shooting.
On
25 Save Menu Location
Saves the last menu tab displayed on the monitor and displays
it again the next time
F
is pressed.
Reset Menu
Location
26 Catch-in Focus
Enables Catch-in Focus shooting when a manual focus lens
is attached. The shutter is released automatically when the
subject comes into focus.
Off
–
27 AF Fine Adjustment
Allows you to precisely fine tune your lenses with the camera’s
autofocus system.
Off
28 Using Aperture Ring
Enables the shutter to release when the lens aperture ring
is set to a position other than
9
(Auto).
Disable
E
5
Reset Custom Functions
Resets all the settings of the Custom Setting menus to
the defaults.
–
–
Menu
Item
Function
Default Setting Page
KS2_OPM_EN.book Page 29 Friday, February 20, 2015 12:10 PM