1
28
Introduction
Custom Setting Menus
Menu
Item
Function
Default Setting Page
E
1
1 EV Steps
Sets the adjustment steps for exposure.
1/3 EV Steps
2 Sensitivity Steps
Sets the adjustment steps for ISO sensitivity.
1 EV Step
3 Meter Operating Time
Sets the meter operating time.
10sec.
–
4 AE-L with AF Locked
Sets whether to lock the exposure value when the focus
is locked.
Off
–
5 Link AE and AF Point
Sets whether to link the exposure and AF point in the focusing
area.
Off
6 Auto EV Compensation
Automatically compensates the exposure when the correct
exposure cannot be achieved with the current settings.
Off
–
7 Bulb (B) Mode Options
Sets the camera operation when pressing
0
in
M
mode.
Type1
–
E
2
8 Bracketing Order
Sets the order for Bracketing shooting.
0 - +
9 One-Push Bracketing
Shoots all frames with one release when using Bracketing.
Off
10 Interval Shooting Options
Sets whether to start counting the time of interval from when
exposure starts or when exposure ends for Interval Shooting,
Interval Composite, and Interval Movie Record.
Interval
11 AF in Interval Shooting
Sets whether to lock the focus position used when the first
picture is taken or perform autofocus for each exposure for
Interval Shooting and Interval Composite.
Locks focus at
1st exposure
12 WB Adjustable Range
Sets whether to automatically fine-tune the white balance
when the light source is specified for the white balance setting.
Fixed
13 WB When Using Flash
Sets the white balance setting when using a flash.
Auto White
Balance
14 AWB in Tungsten Light
Sets the tungsten light color tone when the white balance is set
to [Auto White Balance].
Strong
Correction
KS2_OPM_EN.book Page 28 Friday, February 20, 2015 12:10 PM