2
30
Getting Started
1
Pass the end of the strap
through the strap lug and
secure it on the inside
of the clasp.
2
Attach the other end in the same manner.
1
Make sure that the camera is turned off.
2
Remove the body mount
cover (
1
) and lens mount
cover (
2
).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3
Align the lens mount indexes
(red dots:
3
) on the camera
and the lens, and secure by
turning the lens clockwise
until it clicks.
Attaching the Strap
Attaching a Lens
3
3
KS2_OPM_EN.book Page 30 Friday, February 20, 2015 12:10 PM