2
33
Getting Started
2
Face the
A
mark on the
battery towards the outside
of the camera, and insert
the battery until it locks
into place.
To remove the battery, push the
battery lock lever in the direction
of
2
.
3
Close the battery cover.
t
Memo
• The battery level may not be displayed properly if the camera
is used at low temperatures or when performing Continuous
Shooting for a long time.
• Battery performance temporarily decreases as the
temperature decreases. When using the camera in cold
climates, have extra batteries at hand and keep them warm
in your pocket. Battery performance will return to normal
at room temperature.
• Have extra batteries ready when traveling overseas, or taking
a lot of pictures.
We recommend the use of the optional AC adapter kit K-AC128
when using the monitor for a long time or when connecting
the camera to a computer or AV device.
1
Make sure that the camera is turned off.
2
Open the battery cover.
Remove the battery if it is inserted in the camera.
3
Pull out the connection cable
cover on the right side of the
battery chamber.
4
Insert the DC coupler into
the battery chamber.
5
Close the battery cover.
Make sure that the connection
cable comes out from the
connection cable opening.
2
Using the AC Adapter
KS2_OPM_EN.book Page 33 Friday, February 20, 2015 12:10 PM
