3
55
Shooting
1
Press
G
in standby mode.
2
Select [AF Mode] and press
E
.
The [AF Mode] screen appears.
3
Select an autofocus mode
and press
E
.
The control panel reappears.
4
Press
F
.
The camera returns to standby mode.
t
Memo
• The following settings for autofocus operation can be set in
the
E
3 menu.
In [20 Hold AF Status], you can set whether to immediately
reactivate autofocus or to maintain the focus for a certain
amount of time before reactivating autofocus when the
subject happens to move out of the selected focusing area
after being focused. The default setting is to immediately
reactivate autofocus when the subject moves out of focus.
• In
S
mode, [AF Mode] is fixed to
x
or
y
depending on the selected scene mode. (p.110)
• In
R
mode, [AF Mode] is fixed to
z
.
Setting the AF Mode when Shooting
with the Viewfinder
v
/
A
1
z
Auto-select mode
Switches automatically between
x
and
y
modes according
to the subject.
x
Single mode
When
0
is pressed halfway and
the subject comes into focus, the
focus is locked at that position.
The AF assist light turns on as
necessary.
y
Continuous mode
The subject is kept in focus by
continuous adjustment while
0
is pressed halfway.
P
appears in the viewfinder when
the subject comes into focus.
The shutter can be released even
if the subject is not in focus.
AF Mode
AF Mode
Cancel
Cancel
OK
OK
17 AF.S Setting
Focus-priority, Release-priority
18 1st Frame Action
in AF.C
Release-priority, Auto, Focus-priority
19 Action in AF.C
Continuous
Focus-priority, Auto, FPS-priority
20 Hold AF Status
Off, Low, Medium, High
KS2_OPM_EN.book Page 55 Friday, February 20, 2015 12:10 PM
