3
70
Shooting
You can measure the white balance at a selected location.
1
Select
o
in Step 2 of
2
Under the light you wish to measure the white
balance of, select a white area as the subject,
and press
0
fully.
The captured image is displayed.
3
Use
ABCD
to specify
the measuring area.
Press
M
to return the measuring
area to the center.
4
Press
E
.
The White Balance setting screen reappears.
[The operation could not be completed correctly] appears
when measuring is unsuccessful. Press
E
to remeasure
the white balance and return to Step 3.
t
Memo
• You can copy the white balance settings of a captured image
and save them as manual white balance settings in [Save as
Manual WB] of the playback mode palette. (p.77)
Specify the white balance with the color temperature.
1
Select
p
in Step 2 of “Setting the White Balance”
2
Press
G
.
3
Adjust the color temperature.
Set the color temperature value
within the range from 2500K to
10000K.
Available operations
4
Press
E
.
The White Balance setting screen reappears.
t
Memo
• Select [Mired] in [15 Color Temperature Steps] of the
E
3
menu to set the color temperature in mired units. The color
temperature can be changed in 20 mired units with
Q
,
and 100 mired units with
R
. However, figures are
converted to and displayed in Kelvin.
Adjusting the White Balance Manually
WB±
WB±
Manual White Balance
Manual White Balance
Cancel
Cancel
Check
Check
Adjust
Adjust
OK
OK
Cancel
Cancel
OK
OK
Adjusting the White Balance
with Color Temperature
Q
Changes the color temperature
in increments of 100 Kelvin.
R
Changes the color temperature
in increments of 1000 Kelvin.
ABCD
Fine-tunes the color temperature.
±0
±0
±0
±0
±0
±0
Cancel
Cancel
OK
OK
Color Temperature
Color Temperature
KS2_OPM_EN.book Page 70 Friday, February 20, 2015 12:10 PM
