4
82
Playback
Connect the camera to a computer using a USB cable.
Make sure to have a commercially available USB cable
equipped with a micro B terminal.
1
Turn the computer on.
2
Turn the camera off.
3
Open the terminal cover of
the camera, and connect the
USB cable to the USB
terminal.
4
Connect the USB cable to the USB port
of the computer.
5
Turn the camera on.
The camera is recognized as a removable disk.
The
E
lamp of the camera blinks slowly.
6
Save the captured images to the computer.
7
Disconnect the camera from the computer.
u
Caution
• The camera cannot be operated while it is connected
to a computer. To operate the camera, terminate the USB
connection on the computer, then turn off the camera and
remove the USB cable.
• If the “K-S2” dialog appears on the computer screen
in Step 5, select [Open folder to view files] and click
the OK button.
t
Memo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.129) for system requirements to
connect the camera to a computer and to use the software.
• The USB connection mode when connecting the camera to a
computer can be set in [USB Connection] of the
D
2 menu.
Normally, you do not need to change the default setting
([MSC]).
• If you intend to use the camera continuously for a long period,
the use of the optional AC adapter kit is recommended.
Connecting the Camera
to a Computer
KS2_OPM_EN.book Page 82 Friday, February 20, 2015 12:10 PM
